Products

This is a pre‑owned original power board PN: I038402 / I038286 / I038406 for Noritsu QSS digital minilab photo printing machine. Every unit has been fully tested before shipment to guarantee stable 24V power output. It serves as core switching power supply component to supply power for minilab main system. Ideal replacement when original power board fails, short‑circuits or cannot boot. Cost‑effective spare part for photo lab maintenance & repair.

The brand‑new A081673 Dryer Sponge Roller (cross‑reference A035703‑00) is dedicated replacement spare‑part for Noritsu QSS‑26, QSS‑30, QSS‑33, QSS‑35 series digital minilabs. Installed inside dryer section, this high‑temperature‑resistant sponge roller transports wet photo paper, provides even soft pressure to prevent scratch, wrinkle and photo curling during drying process. It resolves common defects caused by aged sponge: dryer‑unit paper jam, uneven drying and high photo reject rate. With precise dimension for direct drop‑in installation, it is essential consumable for commercial photofinishing labs. Professional technician installation is recommended. Please verify original part number before purchase.

The reconditioned J390947 Printer Control PCB Board is original replacement spare‑part for Noritsu QSS‑3201, QSS‑3202, QSS‑3203, QSS‑3301 and LPS‑24Pro digital minilab. As the core logic mainboard of printer unit, it handles signal communication, multi‑motor drive control, sensor acquisition and laser exposure synchronization. It fixes common PCB‑caused failures including printer communication abort, motor non‑response, random error codes, print abort and initialization failure. This board is fully reconditioned and function‑tested for stable continuous operation in commercial photo labs. Professional technician installation and machine initialization are required. Please confirm your original part number before purchase.

Brand‑new replacement Printer I/O PCB Board, Part No. J391490‑00, compatible with Noritsu QSS‑32 and QSS‑37 series digital silver‑halide minilabs. This printer input‑output interface board undertakes signal interaction between printer main control board and on‑site components: collecting sensor feedback signals, sending driving commands to solenoids, paper‑transport actuators and mechanical switches. It ensures reliable signal transmission for paper detection, paper magazine sensing, mechanical home position detection and safety interlock protection. Circuit damage caused by static electricity, voltage spike or component aging will trigger typical malfunctions: sensor mis‑reading, paper‑jam false alarm, magazine detection failure, mechanism no response, intermittent printer error codes and printing workflow abort. Replacing with brand‑new J391490‑00 I/O PCB restores normal printer signal interaction function, eliminates IO‑related faults and reduces photo lab production‑stop loss.

Brand‑new replacement main power supply board, Part No. **J391466**, designed for Noritsu QSS‑37 and QSS‑38 series digital silver‑halide minilabs. This is the core power‑supply unit for the printer section, converting input AC power into multiple groups of stable DC voltage for printer motors, solenoids, sensors and exposure modules.

Brand‑new replacement copper wheel Part No. A065961, specially made for the 135/240 AFC‑II film carrier of Noritsu QSS‑32, QSS‑34, QSS‑37, QSS‑38 silver‑halide digital minilab scanners. This copper wheel is the core clamping‑transport component installed inside the negative film carrier, holding and driving 135 & 240‑format negative film smoothly during scanning procedure.

Original replacement double‑layer gear Part No. 327C966214 / 327C966214C, designed exclusively for Fuji Frontier 330 and 340 silver‑halide digital minilab printers. This dual‑structure transmission gear is mounted inside the paper‑feeding assembly, transferring torque between transport rollers to achieve stable and consistent photo‑paper delivery. Manufactured with original‑spec high‑wear‑resistant engineering plastic, both layers of gear teeth are precisely machined for smooth meshing.

Brand‑new replacement double‑layer helical gear, Part No. **327D1060169**, specially produced for Fuji Frontier 500, 550 and 570 silver‑halide digital minilab machines. This dual‑structure gear is installed inside the paper‑transport transmission assembly, transferring driving power between multiple roller shafts to guarantee steady and smooth photo‑paper feeding. It is manufactured from high‑strength, high‑wear‑resistant engineering plastic, with precisely‑machined helical teeth on both gear layers. Long‑time continuous operation will cause original gear teeth abrasion, leading to common faults such as transmission slipping, abnormal running noise, photo‑paper offset, repeated paper‑jam errors and transport failure. Installing this brand‑new 327D1060169 double‑layer gear can restore normal power transmission, eliminate mechanical breakdowns, and minimize unexpected downtime losses for your photo‑lab equipment. It is an essential maintenance spare‑part for photofinishing worksh

Brand‑new replacement bushing Part No. A032741, specially engineered for Noritsu QSS 3501, 3202, 3701 and other compatible digital minilab machines. It is a critical shaft‑support component installed inside the paper transport unit. This bushing provides stable rotational support for transmission shafts and transport rollers, reducing friction between moving parts during paper‑feeding operation. Made of premium high‑wear‑resistant engineering plastic, it features precise inner‑hole dimension and perfect concentricity. Worn‑out old bushings often cause abnormal running noise, roller shake, photo‑paper offset, paper jamming and transport error alarms. Installing this brand‑new A032741 bushing can effectively eliminate above‑mentioned mechanical faults, restore smooth paper‑feeding performance, and minimize unexpected downtime of your minilab equipment. An essential maintenance spare‑part for commercial photo labs and minilab repair technicians.

Brand‑new replacement dryer gear Part No. 327C1061589, specially designed for Fuji Frontier 550, 570, LP5700R silver‑halide digital minilab machines. It is a key transmission component installed in the dryer exit transport section, delivering stable driving force for the drying‑rack roller system to ensure smooth photo‑paper output after drying procedure. Manufactured from high‑strength, heat‑resistant and anti‑wear engineering plastic, this gear features precise tooth profile, accurate mounting dimension and excellent concentricity. Long‑time high‑temperature operation inside the dryer chamber easily causes original gear teeth wear‑out, which will trigger abnormal running noise, paper jam, photo‑paper transport halt and dryer error alarms. Installing this brand‑new 327C1061589 dryer gear can effectively eliminate above‑mentioned mechanical failures, restore stable paper delivery of the drying system, and cut unexpected equipment downtime loss. An essential maintenance

No. 327D1061321 (D20T) Brand‑new replacement gear Part , specially designed for Fuji Frontier 500, 550, 570 silver‑halide digital minilab machines.