Products

The Noritsu QSS3202SD professional digital laser minilab is a classic silver halide photo printing machine from Noritsu QSS32SD series, widely adopted by commercial photo labs, portrait studios and wholesale photo printing businesses worldwide. This QSS3202SD laser minilab adopts RGB laser scanning exposure technology, delivering stable, true-to-life color output and rich image gradation for mass photo production. Fully inspected and tested before delivery, the machine runs smoothly with all core functions intact. It supports normal photo prints as well as ultra-long panoramic photos up to 12×36 inch (305×914mm), helping photo shops expand high-margin print services

This J391523 laser control PCB is the key main control board inside the laser exposure unit of Noritsu QSS3701, QSS3702, QSS3703 and QSS3704HD minilabs. It precisely controls RGB laser modulation, image data decoding, laser power calibration and synchronization during paper exposure. Stable signal output ensures consistent photo density and color accuracy.

This J391121 / J391238 switch control PCB is fitted inside the desk control box of Noritsu QSS32 series minilabs. It is specially built for machines running without a film scanner, receiving digital image input directly for photo printing. It handles ARCNET fiber communication signal switching between the control console and printer unit, stable signal transmission to avoid communication dropouts. Available in 4 fiber port and 8 fiber port versions for different configuration requirements, easy replacement for faulty original boards.

Noritsu QSF-V30S automatic C41RA film processor, dual-channel design with auto film recognition. Supports 135,120,APS,110,127. ±0.1°C precise control, up to 22 rolls/hour. Ideal for photo labs, compatible with Noritsu QSS laser minilabs.

Brand new chemical tank heater for Noritsu LPS24PRO. Rated 600W, stainless steel heating tube with high temperature resistant wire. Matches original mounting size and connector, easy to swap for faulty heater. Essential spare part for minilab chemical system maintenance.

Brand-new drying temperature sensor probe for Noritsu LPS24PRO digital minilab. Pre-calibrated with precise temperature feedback. Plug-and-play design, easy to install, ideal maintenance spare part to replace the faulty original sensor.

This refurbished Fuji Frontier 7700 (LP7700) is an all-in-one silver halide laser minilab for professional photo finishing. It adopts Fuji RGB solid-state laser exposure system at 300×600 dpi, equipped with Image Intelligence auto image correction. It supports high-volume 4R printing up to 2120 prints per hour and max 36-inch long prints. Every unit is fully disassembled, replaced worn parts, calibrated and tested before shipment, stable for long daily operation in photo studios and retail photo labs.

This brand-new green laser gun serves as the core green channel exposure component for Noritsu QSS3701G, QSS3801G and QSS3901G digital minilabs. It provides steady green laser output to solve typical problems including green color shift, insufficient image density, mottled prints and laser shutdown. Manufactured according to original specifications, it needs professional calibration after installation, allowing photo shops to restore consistent, high-standard photo output.

This brand-new blue laser gun is the core exposure component for Noritsu QSS3701G, QSS3801G, QSS3901G digital minilabs. It delivers stable blue laser output, fixes common faults such as color cast, weak density, uneven prints and laser failure. Precisely matched to original specs, plug-and-play after calibration, helps photo labs resume high-quality silver halide photo printing quickly.

This J390878 / J391259 mainboard, made in Japan, serves as the core printer controller for Noritsu QSS32 and QSS33 series. It manages print workflow and signal scheduling, resolving boot failures and printer offline faults reliably.

This brand-new I038401-00 switching power PCB delivers stable 24V 9A DC output for Noritsu QSS32/35/37/38 minilabs. It supplies power to printer modules, resolves power dropout, boot failure and unstable voltage issues.

J390656 laser control PCB manages laser signal, power and timing for exposure. It pairs with laser gun & AOM, fixes laser alarms and uneven density, restoring stable photo output for Noritsu QSS3001, QSS3011, QSS3101 minilabs.