Minilab Parts
Minilab Parts is a dedicated replacement parts system for printing equipment, covering core components such as lasers, drivers, photocells, circuit boards, belts, rollers, slots, gears, bushings, springs, motors, paper clamping arm cables, replenishment pumps, circulation pumps, power supplies, cooling fans, color densitometers, heating rods, keyboards, ribbons, filters, lenses, and calibration discs. These minilab machine spare parts are widely used for routine maintenance, troubleshooting, and refurbishment of commercial imaging equipment. All minilab machine replacement parts strictly adhere to original manufacturer standards, using wear-resistant, corrosion-resistant, and chemical-resistant materials. They are compatible with high-frequency, continuous commercial operation and can precisely match the structure and operating parameters of various generations of mainstream models, effectively resolving common faults such as paper feed misalignment, uneven imaging, chemical leakage, and transmission jamming.
Send your inquiry
The Turn Rack Unit is the core mechanical turning and paper‑redirecting assembly inside Noritsu QSS minilabs. Long‑term continuous operation will lead to gear tooth wear, cracking and chipping, which causes typical failures such as mechanical grinding noise, turn rack stuck, paper skewing, paper jam and paper transport interruption.
This 21‑pieces full gear repair kit gathers all frequently‑damaged gears of turn rack unit. All gears follow original dimension standard for perfect fitting. No modification needed during installation. Replacing the whole gear set at one time avoids repeated disassembly and secondary failure. It greatly reduces machine downtime and maintenance workload for photo labs.
This 21‑pieces full gear repair kit gathers all frequently‑damaged gears of turn rack unit. All gears follow original dimension standard for perfect fitting. No modification needed during installation. Replacing the whole gear set at one time avoids repeated disassembly and secondary failure. It greatly reduces machine downtime and maintenance workload for photo labs.
A081563 drive pulley is an original transport system spare part for Noritsu QSS digital minilab. This pulley works together with timing belt to drive paper feeding and paper transportation. High‑precision mechanical dimension, good wear resistance. Direct replacement for worn, cracked or deformed old pulley. Solve paper jam, paper skipping and belt slipping issues for photo lab minilab equipment.
Brand‑new original LDD23 PCB, part number 857C1059597, core control section board for Fuji Frontier 550,570,570R, LP5500, LP5700 digital minilab. Every board undergoes full‑function inspection & testing before shipment. Direct plug‑and‑play replacement for faulty original LDD23 board, fixes machine startup error, printing abnormality and related alarm codes. Reliable spare part for photo lab maintenance & repairing Fuji minilab printer.
Original brand‑new switching power PCB PN: I038401‑00 (PS1 power unit), specially designed for Noritsu QSS 32 / 35 / 37 / 38 series digital minilab photo printing machine. It provides stable 24V 9A & 5V 5A dual output for the whole minilab system. Strict quality inspection & full‑function testing before shipment. Perfect replacement when original power board burn‑out, no power output, startup failure. Reliable brand‑new spare part for photo lab daily maintenance.
This is a pre‑owned original power board PN: I038402 / I038286 / I038406 for Noritsu QSS digital minilab photo printing machine. Every unit has been fully tested before shipment to guarantee stable 24V power output. It serves as core switching power supply component to supply power for minilab main system. Ideal replacement when original power board fails, short‑circuits or cannot boot. Cost‑effective spare part for photo lab maintenance & repair.
The brand‑new A081673 Dryer Sponge Roller (cross‑reference A035703‑00) is dedicated replacement spare‑part for Noritsu QSS‑26, QSS‑30, QSS‑33, QSS‑35 series digital minilabs. Installed inside dryer section, this high‑temperature‑resistant sponge roller transports wet photo paper, provides even soft pressure to prevent scratch, wrinkle and photo curling during drying process. It resolves common defects caused by aged sponge: dryer‑unit paper jam, uneven drying and high photo reject rate. With precise dimension for direct drop‑in installation, it is essential consumable for commercial photofinishing labs. Professional technician installation is recommended. Please verify original part number before purchase.
The reconditioned J390947 Printer Control PCB Board is original replacement spare‑part for Noritsu QSS‑3201, QSS‑3202, QSS‑3203, QSS‑3301 and LPS‑24Pro digital minilab. As the core logic mainboard of printer unit, it handles signal communication, multi‑motor drive control, sensor acquisition and laser exposure synchronization. It fixes common PCB‑caused failures including printer communication abort, motor non‑response, random error codes, print abort and initialization failure. This board is fully reconditioned and function‑tested for stable continuous operation in commercial photo labs. Professional technician installation and machine initialization are required. Please confirm your original part number before purchase.
Brand‑new replacement Printer I/O PCB Board, Part No. J391490‑00, compatible with Noritsu QSS‑32 and QSS‑37 series digital silver‑halide minilabs. This printer input‑output interface board undertakes signal interaction between printer main control board and on‑site components: collecting sensor feedback signals, sending driving commands to solenoids, paper‑transport actuators and mechanical switches. It ensures reliable signal transmission for paper detection, paper magazine sensing, mechanical home position detection and safety interlock protection. Circuit damage caused by static electricity, voltage spike or component aging will trigger typical malfunctions: sensor mis‑reading, paper‑jam false alarm, magazine detection failure, mechanism no response, intermittent printer error codes and printing workflow abort. Replacing with brand‑new J391490‑00 I/O PCB restores normal printer signal interaction function, eliminates IO‑related faults and reduces photo lab production‑stop loss.
Brand‑new replacement main power supply board, Part No. **J391466**, designed for Noritsu QSS‑37 and QSS‑38 series digital silver‑halide minilabs. This is the core power‑supply unit for the printer section, converting input AC power into multiple groups of stable DC voltage for printer motors, solenoids, sensors and exposure modules.
Brand‑new replacement copper wheel Part No. A065961, specially made for the 135/240 AFC‑II film carrier of Noritsu QSS‑32, QSS‑34, QSS‑37, QSS‑38 silver‑halide digital minilab scanners. This copper wheel is the core clamping‑transport component installed inside the negative film carrier, holding and driving 135 & 240‑format negative film smoothly during scanning procedure.
Original replacement double‑layer gear Part No. 327C966214 / 327C966214C, designed exclusively for Fuji Frontier 330 and 340 silver‑halide digital minilab printers. This dual‑structure transmission gear is mounted inside the paper‑feeding assembly, transferring torque between transport rollers to achieve stable and consistent photo‑paper delivery. Manufactured with original‑spec high‑wear‑resistant engineering plastic, both layers of gear teeth are precisely machined for smooth meshing.
We focus on providing minilab printer, printer laser, double side laser photo printer, film scanner, Ablum maker, Photo printer, minilab laser, minilab parts, technology serives, Film process for various industries.
Useful Links
Products
Contact Us
Add: No. 13, Unit 3, Building 11, No. 338, Lianhua Street, Electronics Industrial Park, Zhengzhou High-tech Zone, China
Contact person: Yangfang
E-mail: sales@qssfuji.com
ebanglaser@gmail.com
ebanglaser@gmail.com
Tel: +86-13253607000
Copyright © 2026 Ebang Electronic Technology Co.,Ltd. - www.ebanglab.com | Sitemap | Privacy Policy