Minilab Parts
Minilab Parts is a dedicated replacement parts system for printing equipment, covering core components such as lasers, drivers, photocells, circuit boards, belts, rollers, slots, gears, bushings, springs, motors, paper clamping arm cables, replenishment pumps, circulation pumps, power supplies, cooling fans, color densitometers, heating rods, keyboards, ribbons, filters, lenses, and calibration discs. These minilab machine spare parts are widely used for routine maintenance, troubleshooting, and refurbishment of commercial imaging equipment. All minilab machine replacement parts strictly adhere to original manufacturer standards, using wear-resistant, corrosion-resistant, and chemical-resistant materials. They are compatible with high-frequency, continuous commercial operation and can precisely match the structure and operating parameters of various generations of mainstream models, effectively resolving common faults such as paper feed misalignment, uneven imaging, chemical leakage, and transmission jamming.
Send your inquiry
Brand new H016920 timing belt for Noritsu QSS 3201 minilab. Reinforced toothed belt solves paper feeding jam and offset errors. In stock, fast global shipping for photo‑lab maintenance.
Premium H016910 / H016910‑00 toothed timing belt, direct OEM replacement for Noritsu QSS 3201, 3202, 3203 digital minilab paper‑supply unit. Reinforced polyurethane construction resists stretching and aging, delivering accurate synchronous drive for paper feeding. In‑stock for fast worldwide dispatch for photo‑lab and repair workshops.
Brand new A035148 / A050029 stabilizer drive belt, specially engineered for Noritsu QSS 2601, 3001, 3300 and 3501 minilabs. High elasticity, low wear and anti-slip design ensures stable paper transport and consistent printing performance.
D006533 / D006099 Insertion Rack Noritsu QSS 3501 3502 3501plus 3502G Minilab Replacement Spare Part
D006533 D006099 Insertion Rack replacement spare part, compatible with Noritsu QSS 3501,3502,3501plus,3502G digital minilab photo printer for photo lab maintenance.
Brand‑new Z021441 calibration plate is a professional color density standard reference spare part for Noritsu minilabs. Specially built for daily color calibration, density testing and printer color correction. It helps your machine restore accurate color output, eliminate color cast, uneven density and printing deviation. Fully compatible with Noritsu QSS32, QSS33, QSS35, QSS37, LPS24Pro minilab systems. Strict density value control guarantees consistent and reliable calibration results for long‑term lab production.
118C938489 (also marked F118C938489) is a brand-new high-precision paper transport stepper motor, specially produced for FUJI Frontier 340, 350, 355, 370, 375 digital minilabs. As the core power component of the paper feeding and transmission system, it provides stable step drive power for accurate photo paper conveying and positioning. Aging or damaged motors will cause paper feeding jitter, paper jam, unstable paper length, motor abnormal noise and machine error alarms. Every motor is fully tested before shipment, direct plug-and-play replacement to restore stable paper-transport operation and reduce lab downtime.
A036897‑01 is the worm drive gear for Noritsu QSS2601, QSS2901, QSS3001, QSS3201 minilab transport rack assembly. It transfers motor torque to drive chemical tank rack rotation.
Worn or cracked worm gear will cause rack jamming, abnormal grinding noise, rack rotation failure, paper transport halt and machine error alarm. Every gear undergoes visual inspection and dimension check before shipment, direct‑fit replacement, help photo lab resume production rapidly.
Worn or cracked worm gear will cause rack jamming, abnormal grinding noise, rack rotation failure, paper transport halt and machine error alarm. Every gear undergoes visual inspection and dimension check before shipment, direct‑fit replacement, help photo lab resume production rapidly.
W413854 (interchangeable W413854‑01) is long‑type left arm signal harness for Noritsu QSS3702, QSS3704, QSS3800 digital minilabs. It transmits power and sensor signals for left arm moving assembly.
Fractured or ageing arm cable will trigger intermittent communication error, arm movement alarm, arm position failure, random machine halt. Every harness undergoes continuity & connector inspection before shipment, direct plug‑in replacement. Goods are in stock with favorable bulk‑order discount.
Fractured or ageing arm cable will trigger intermittent communication error, arm movement alarm, arm position failure, random machine halt. Every harness undergoes continuity & connector inspection before shipment, direct plug‑in replacement. Goods are in stock with favorable bulk‑order discount.
H076033 is the full‑assembly paper cutter unit for Noritsu QSS32 and QSS37 minilabs. It completes accurate photo‑paper trimming after printing.
Damaged cutter unit causes paper‑cut error codes, incomplete cutting, paper jam, abnormal motor noise and print‑job halt. Pre‑tested before shipment, direct‑fit replacement. Effectively resolves cutter‑related failures and reduces lab downtime. Interchangeable part number: H076033‑00, Z021352
Damaged cutter unit causes paper‑cut error codes, incomplete cutting, paper jam, abnormal motor noise and print‑job halt. Pre‑tested before shipment, direct‑fit replacement. Effectively resolves cutter‑related failures and reduces lab downtime. Interchangeable part number: H076033‑00, Z021352
J391436 is the Booster‑F small booster PCB for Noritsu QSS37 minilab laser assembly. It supplies stable driving signal for laser channel.
Damaged board will cause laser channel abnormal, color deviation, intermittent laser alarm, print color failure. Every unit is fully inspected and tested before shipment, direct plug‑in replacement. Effectively restore laser‑system performance and reduce lab downtime.
Damaged board will cause laser channel abnormal, color deviation, intermittent laser alarm, print color failure. Every unit is fully inspected and tested before shipment, direct plug‑in replacement. Effectively restore laser‑system performance and reduce lab downtime.
This brand‑new Fuji AOM Driver is a core laser‑control assembly for Fuji Frontier series digital minilabs. It controls AOM modulator to adjust RGB laser beam power for photo exposure.
Faulty AOM driver will trigger typical failures: laser no‑output, uneven print density, color cast, laser‑related alarm codes, partial image missing. Fully pre‑tested before shipment, direct plug‑and‑play replacement. Effectively restores laser exposure performance and cuts lab production downtime. Multiple interchangeable part numbers:616C1059602, 398C967318, 616C967142.
Faulty AOM driver will trigger typical failures: laser no‑output, uneven print density, color cast, laser‑related alarm codes, partial image missing. Fully pre‑tested before shipment, direct plug‑and‑play replacement. Effectively restores laser exposure performance and cuts lab production downtime. Multiple interchangeable part numbers:616C1059602, 398C967318, 616C967142.
W409635 is brand‑original paper‑feed stepper motor for Noritsu QSS32, QSS34, QSS37, QSS38 and LPS24Pro digital minilabs. It drives paper‑transport assembly and precisely controls photo‑paper feeding movement.
Damaged or ageing paper feed motor will trigger symptoms: paper feed failure, intermittent paper jam, motor error codes, abnormal noise, incomplete paper advance. This original motor is fully pre‑tested before shipment, direct plug‑in replacement. Effectively restore stable paper feeding performance and reduce lab downtime. Interchangeable with part number W409635‑01.
Damaged or ageing paper feed motor will trigger symptoms: paper feed failure, intermittent paper jam, motor error codes, abnormal noise, incomplete paper advance. This original motor is fully pre‑tested before shipment, direct plug‑in replacement. Effectively restore stable paper feeding performance and reduce lab downtime. Interchangeable with part number W409635‑01.
We focus on providing minilab printer, printer laser, double side laser photo printer, film scanner, Ablum maker, Photo printer, minilab laser, minilab parts, technology serives, Film process for various industries.
Useful Links
Products
Contact Us
Add: No. 13, Unit 3, Building 11, No. 338, Lianhua Street, Electronics Industrial Park, Zhengzhou High-tech Zone, China
Contact person: Yangfang
E-mail: sales@qssfuji.com
ebanglaser@gmail.com
ebanglaser@gmail.com
Tel: +86-13253607000
Copyright © 2026 Ebang Electronic Technology Co.,Ltd. - www.ebanglab.com | Sitemap | Privacy Policy